Pitot tube installed

03/22/2013

Fuselage

Spending today working on the brakes for the car. But, before I started, I ran over to Ace and picked up some 2 1/2" bolts and washers for the engine mounts and 7' of hose for the pitot tube. After I finished the brakes, I decided to move the car and plane out of the garage and put in the pitot tube. Zip tied the hose to the anti-sway supports and fed the hose over about 1" of the pitot tube. Used a zip tie to clamp it and will use a wood screw to hold it into position after covering it.

After I finished, I noticed that I put on the pitot tube backwards. I'll need to fix this later.